User`s guide

KEYS: F5 45
For example, to enter Setup when ScanCode and Local Leadin
are on, press Ctrl-Scroll Lock (Ctrl-Select on the ANSI keyboard) to
introduce this as a local function (“LEAD” will appear in the
status line), and then Ctrl-Scroll Lock (Ctrl-Select on the ANSI
keyboard) to enter Setup.
Local Leadin will not work if Comm Mode is set to Half Block or
Full Block.
UDKs: [Emul Dependent, User Dependent]
Choose whether the UDKs should get defaulted when the host
changes the emulation.
The following selections apply to the PC keyboards:
Disconnect: [Disabled, Pause, Alt-Pause]
Select the keystroke that will generate a modem disconnect.
Backspace: [BS/DEL, DEL/BS, DEL/CAN, BS/BS]
Choose the codes sent by the backspace key in the
normal/shifted positions.
Desk Acc: [Sh-Ctrl-Fkeys, Ctrl ←← , Disabled]
Select how the Desk Accessories can be accessed. This selection
does not appear when SCO Console emulation is selected. In
SCO Console emulation, Ctrl ← is the only access method.
The default allows the desk accessories to be accessed through a
menu which appears when Ctrl and the left arrow key are
pressed simultaneously. This brings up a pop-up window;
selections for the specific accessory can be made from that menu
by pressing F1-F5. The Sh-Ctrl-Fkeys option, when selected,
allows direct access to desk accessories (bypassing the menu) by
pressing Sh-Ctrl-F1 through Sh-Ctrl-F5. Selecting Disabled will
inhibit entry to desk accessories. Once a desk accessory is
displayed, any other desk accessory can be accessed by pressing
only the function key associated with it (without pressing
Sh-Ctrl).