User`s guide

KEYBOARD: F4 41
Keyboard Layout: [Q, F]
This selection is only available when Turkish keyboard is
selected. Q and F refer to the two Turkish keyboard layouts
available. Q and F correspond to the top left key on the
alphanumeric keypad.
Margin Bell: [On, Off]
Choose whether a bell tone sounds when the cursor is nine
positions away from the right margin.
Key Lock: [Caps, Reverse, Shift]
Affects the state of alphanumeric keys when Caps-Lock is
engaged.
þ Caps causes alphabetic keys to be uppercase regardless of the
Shift key.
þ Reverse causes the Shift key to generate lowercase
alphabetic keys.
þ Shift causes all alphanumeric keys to be generated as
uppercase (or shifted, in the case of numbers). If the Shift key
is hit, while Shift is selected, Caps-Lock will be disengaged.
Caps Lock: [Toggle, Always On, Always Off]
This setting effects the state of the Caps Lock key. When set to
always on or always off the key has no effect. When set to toggle,
the terminal will power on in the off mode and pressing the key
will alternate between the off mode and the on mode.
Num Lock: [Toggle, Always On, Always Off]
This setting effects the state of the Num Lock key. When set to
always on or always off the key has no effect. When set to toggle,
the terminal will power on in the off mode and pressing the key
will alternate between the off mode and the on mode.
Code Page: [DEC Multi, CP 437, CP 850, CP 852, CP 857, CP 860, CP 861, CP 863,
ISO-1, ISO-2, ISO-5]
This selection is only available in 8-bit emulations in
Multinational Mode. The default code page is based upon
language and emulation selected. To determine which sets are