User`s guide

KEYBOARD: F4 39
KEYBOARD: F4
Language: [U.S., U.K., Danish, Finnish, French, German, Norwegian,
Portuguese, Spanish, Swedish, Dutch, Belgian-Flemish, Fr-Canadian, Italian, Latin
American, Swiss-French, Swiss-German, Turkish]
Select the language type which matches your keyboard’s layout.
Language: [U.S., U.K., Danish, Dutch, Finnish, Belgian-Flemish, French,
Fr-Canadian, German, Italian, Norwegian, Spanish, Swedish, Swiss-German,
Swiss-French, Turkish]
Select the language type which matches your keyboard’s layout.
Char Set Mode: [PC, ANSI, ASCII]
Choose which NRC set to use. This selection is only available in
National Mode and foreign languages. In VT emulations, the
default is ANSI. To determine which sets are loaded for each
mode, refer to the 260xx Programmer’s Reference Guide.
Key Mode: [ASCII, ScanCode]
Select whether keys transmit ASCII codes or the ScanCode. The
ScanCode transmits a “make code” when a key is pressed and a
“break code” upon its release. When ScanCode is selected,
“Comm Mode” is forced to Full Duplex and “Character Set” is
forced to Multinational (8-bit).
Keyclick: [On, Off]
Choose whether pressing a key results in a clicking sound.
Key Repeat: [On, Off]
Choose whether keys, including function keys, will repeat when
pressed for more than half a second. This setting does not affect
the following keys on the EPC keyboard: Caps Lock, Scroll Lock,
Num Lock, Shift keys, Ctrl keys, Alt keys, Return, Print Screen,
Pause. On the ANSI keyboard, the following keys are unaffected:
Lock, F1–F5, Shift keys, Control, Compose, and Return.
Key Rate: [15 cps, 20 cps, 30 cps]
When “Key Repeat” is on, a key that is pressed for more than half
a second will automatically repeat. This selection allows you to