User`s guide

36 Setup
Screen Saver: [Off, 2 min, 5 min, 15 min, 30 min]
Select whether the screen will go blank after lack of activity from
the keyboard or the host of the selected period of time. The first
key typed at the keyboard when the screen is blank will
reactivate the display. The keycode will not be transmitted to the
host. The Caps Lock LED will flash while Screen Saver is active.
Use screen saver to prevent “phosphor burn” on the screen
when the display on the terminal is left unchanged for an
extended time period.
20 minutes after the screen saver is activated, Energy Star, a
power saving feature, is activated. The first key typed at the
keyboard brings the energy level back up.
Bell Volume: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
Select the bell volume from off [0] to high [9]. This will be the
volume for alarm tones, warning bells, and keyclicks.
Warning Bell: [On, Off]
Select whether a warning bell is sounded when errors (such as
an invalid compose sequence) are encountered.
Host/Printer: Designates physical ports to the host and printer.
See the Quick menu earlier in this chapter.
Bell Length: [140 ms, 350 ms, 570 ms, 780 ms]
Denotes duration of bell sound.