User`s guide

31 Setup
QUICK: F1
VT-200-7 VT-200-8
TVI 925 VT-300-7 VT-300-8ADD-VP
Wyse-60
Wyse-50+
VT-100
PC-Term
Emulation=Wyse-60
Aux Baud Rate = 9600
Aux Data Format = 8/1/N
Host/Printer = EIA/Para
Comm Mode = Full Duplex
Enhanced = On
Language = U.S.
EIA BaudRate = 9600
EIA Data Format = 8/1/N
Prnt
Scrn
Emulation: [ADDS VP, Wyse 60, Wyse 50+, PC Term, TVI 925, VT300/8, VT300/7,
VT200/8, VT200/7, VT100]
Select the “personality” of the terminal (the way in which it
responds to commands). If you are using PC-Term emulation,
refer to the Local Leadin selection in the Keys: F5 section for
access to local “hot keys.”
All associated defaults are loaded when the emulation is
changed. Default choices are in bold. Some defaults may vary
depending on the selected emulation.
Comm Mode: [Full Duplex, Half Duplex, Full Block, Half Block]
Select the method of communication to match the host
computer.
EIA Baud Rate: [134,400, 115,200, 76800, 57,600, 38400, 19200, 9600, 4800, 2400,
2000, 1800, 1200, 600, 300, 150, 110]
Select the number of bits communicated per second to match the
speed at which the primary host or printer expects to
communicate.