User`s guide

26 Setup
Entry and Exit
EPC Keyboard: Press Ctrl-Scroll Lock to both enter and exit
setup. Also, press F14 or Pause to exit.
ANSI Keyboard: entry is dependent upon the Setup selections:
þ When “F1 to F5 keys” = Local, press F1 to enter.
þ When “F1 to F5 keys” = FKey, press Ctrl-F3 to enter.
þ When “Key Mode” = Scan Code, press Ctrl-Select to enter.
Saving Parameters
Upon exiting setup mode, the prompt “Save All (Y/N)” blinks.
Press Y or y to exit setup and save settings in permanent
(nonvolatile) RAM. Press C or c to cancel the exit request. Press
N or n to exit Setup. The changes will take effect, but will be lost
if the terminal is reset or powered off.
An exception to this is function/edit key and answerback
message programming. Once edited in Setup, the changes are
saved regardless of the way in which you exit Setup.