User`s guide

20 Installation
Check, Aux Recv, and Aux Xmt. See the Setup chapter for
more information on the individual settings.
Connection C: RS-232 with Modem
1. Follow all procedures of Connection A, steps 1 through 3.
2. If you are connecting to a modem, set the “EIA Modem
Control” parameter to “On” in the Ports (F6) menu.
Connection D: RS-232-C with Modem
1. Follow all procedures of Connection B, steps 1 through 3.
2. If you are connecting to a modem, set the “Aux Modem
Control” parameter to “On” in the Ports (F6) menu.
Connection E: Printer
1. In the Setup Quick (F1) menu, set the Printer portion of the
“Host/Printer” selection to “EIA” without changing the
current Host option (“xxxx/EIA”). The Host will be set in
another connection procedure if needed.
2. Follow procedure of Connection A, step 3.
Connection F: RS-232-C Printer
1. In the Setup Quick (F1) menu, set the Printer portion of the
“Host/Printer” selection to “Aux” without changing the
current Host option (“xxxx/Aux”). The Host will be set in
another connection procedure if needed.
2. Follow procedure of Connection B, step 3.
Connections G and H: Parallel Printer
1. Enter the Setup menu.
2. In the Setup Quick (F1) menu, set the Printer portion of the
“Host/Printer” selection to “Para” without changing the
current Host option (“xxxx/ Para”).