User`s guide

8 Introduction
Usage Notes
The following notations and symbols are used in this manual:
◊ Ctrl-F1: the two keys, Ctrl and F1, are to be pressed
simultaneously.
◊ Ctrl, F1: the two keys, Ctrl and F1, are to be pressed in
succession.
◊ 1-num or 1-alph: specifies that the number must be generated
either from the numeric or alphanumeric keypads.
◊ 23h: the number 23 is represented in hexadecimal (hex)
notation.
◊ applies to ASCII emulations only: ADDS-VP, Wyse 50+,
Wyse 60, PC Term, and TVI-925.
◊ applies to ANSI emulations only: VT300/8, VT300/7,
VT200/8, VT200/7, and VT100.
◊ applies to parallel attribute emulations only: includes
all emulations except ADDS-VP and Wyse 50+ (which are field
attribute emulations).
◊ applies to ASCII key mode only.
◊ applies only to Scan Code key mode.
◊ applies to the PC/+ or EPC keyboards only.
◊ applies to the ANSI keyboard only.