User`s guide

Local Keys 65
NOTES:
* See the Setup chapter. Keystrokes for these functions are
operational only if Setup selection “F1 to F5 keys” = Local.
** The Compose key selection, in the F5 setup menu, must be equal to
Alt.
1 This function is operational only if EIA (Aux) Rcv-Prtcl =
Xon-Xoff/XPC or DTR.
2 In ANSI emulations, this keystroke toggles in and out of Auto Print
Mode.
3 This function is operational even if Screen Saver is set to off.
4 This function unlocks the keyboard, turns off all print modes and
re-initializes the serial ports for setup parameters.
5 The length of the Break Signal is dependent on the setup parameter
of “EIA (Aux) Break.”
6 This keystroke is dependent on the “Disconnect” setting in the
“Keys” (F5) setup menu.
7 The Increment Scroll Rate toggles the scroll rate to the fastest
smooth scroll. This function also stops at the jump scroll. The
Decrement Scroll Rate toggles from jump scroll to the fastest smooth
scroll toward the slowest smooth scroll.
8 These functions are not available in ANSI emulations.
9 The Change Status Line function will toggle in the status line
display from “Indicator” to “Host Write” to “Both” to “Off” in ANSI
Emulations and “Standard” to “Extended” to “Off” on ASCII
Emulations.
10 For other keystrokes for these functions, see the Setup chapter.
11 Keystrokes for these functions are only operational if the “Desk Acc=
Sh-Ctrl-Fkeys” in the setup menu.
12 When a Split Screen is not enabled, these keys select the next or
previous pages. Wrapping takes place from the last page to the first
and vice versa.
13 These local functions are operational only if the selected page is
available.