User's Guide Ethernet Interface Adapter

Hardware Information 11
While waiting for the host to return, the terminal displays the
message Trying to ping followed by the IP address.
If the Host responds, the Ethernet interface displays the
message Successful Ping to followed by the host IP address.
If the Host does not respond within 10 sec, the Ethernet
interface displays the message No response from followed by the
host IP address.
Hardware Information
Select option number 4 from the Main Menu to display specific
hardware information pertaining to the adapter.
- HARDWARE INFORMATION -
Physical Address XX:XX:XX:XX:XX:XX
Code Revision X.XX
Part Number 589-XXXXXXX
Code Checksum XXXXXX
Diagnostic Results Pass / Check XX
Link Integrity OK / No Link
Ethernet Statistics:
Deferred Transmits XX
Excess deferred Transmits XX
Single Collision Count XX
Multiple Collision Count XX
◊ Physical Address or MAC (Media Access Control) address is a
unique address for each network card. This address is
assigned during the manufacturing and is not modifiable by
the users.
◊ Code Revision is the revision of the software that is running
on the Ethernet interface.
◊ Code Checksum is the checksum for the software running on
the Ethernet interface.