Instruction manual

18ENGLISH
OPERATION
__________________________
Styling curls
Your appliance conjures up glamorous
curls and ringlets that are spectacularly
springy and stay in a perfect shape.
Caution
7
The heating element with clip be-
comes very hot. Do not touch with
your hands.
7
Do not allow the heating element
to come into contact with your skin,
face, neck or head.
7
Set the appliance to the lowest
temperature level the first time you
use it. You can find the level which is
suitable for your hair by increment-
ing the temperature level.
1 Place the appliance on a solid, flat,
heat resistant surface.
Use the product stand.
2 Plug the power cord
H
into the wall
socket.
3 Adjust the temperature level with the
temperature setting wheel
F
.
Note
7
There are 3 temperature levels
which are shown with the markers
on the temperature setting wheel.
One dot shows the minimum and
three dots show the maximum tem-
perature level. The temperature can
also be set between the dots.
4 Press and hold down On button
G
for 2 seconds to switch on the ap-
pliance.
– The mode indicator light
E
lights
up blue and starts flashing until it
reaches the set temperature.
– When the appliance has reach-
ed the desired temperature, the
mode indicator light
E
stops
flashing, meaning that it is ready
to use.
– The mode indicator LED is also
flashing when set temperature
will be changed during operation
until new set temperature (higher
or lower) is reached.
5 Comb or brush out a section of your
hair about 3 cm wide.
6 Press and hold down lever
D
. Place
the end of the section of hair under
the clip and release the lever
D
.
7 Wrap the section of hair around the
curling wand with clip
B
towards
your head.
8 After 5 to 10 seconds, press down
lever
D
to open the clip and re-
move the curling wand from the hair.