Owner`s manual
29843-5-1012Page 34
DVLL GLASS MEDIA INSTALLATION
Installation of the glass media is critical to safe and clean op-
eration of the replace.
WARNING
Failure to position the parts in accordance with the dia-
grams and instructions below or failure to use only parts
specically approved for use with this heater may result in
property damage or personal injury.
DECORATIVE GLASS ACCESSORY PLACEMENT
This Linear Contemporary replace is approved for use with
smoothglassmediameasuringassmallas1/4inchandupto1/2
inch in diameter. Empire Comfort Systems offers a selection of
glassmediaforthisreplace.Additionalcolorsmaybeavailable
fromyourEmpiredealer.Useproperlysizedsmoothglassmedia
approvedforgasreplaces.Followthediagramsinthismanualfor
placementofmediaandclearancetoburnerports.
CAUTION
Use of gloves and eye protection is required while applying
the decorative glass.
▲
▼
▲
BURNER
GLASS MEDIA RETAINER
MEDIA TRAY
▲
GLASS MUST NOT BE PLACED ON TOP OF OR
NEXT TO BURNER. GLASS TO BE PLACED ONLY
TO THE OUTSIDE OF THE FLANGED OPENING.
Figure 56
1. Removethefrontandtheglassframeassembly.
2. Placethelongthinglasspiece(glassmediaretainer)intothe
grooveinfrontofthemediatrayinthefireboxopening.This
willkeeptheglassbeadsfromfallingout.
3. Placedime-sizedpiecesofemberacrosstheburnersurface.
Asinglelayer,issufficient;donotover-apply.
4. Carefullyopenthe7.5lbs.bagofglassbeads.Distributethe
glassbeadsevenlyacrossthemediatray,takingcarenotto
lettheglassbeadsfalldownbytheburnerorthepilot.Ifthey
do,makesuretheydon'tblocktheburnerorpilot.Thereare
1/2"wallsaroundtheburner,pilotandbackairslotstokeep
thebeadsout.
5. Replacetheglassframeassemblyanddecorativefront.










