Specifications

APPENDIX
5-2
TROUBLESHOOTING
SYMPTOM CAUSE REMEDY
No power indication Power switch is not on Turn on power switch
Power amplifier is not plugged in Connect to an AC outlet
Home circuit breaker is tripped Reset circuit breaker
Red power indication Low line voltage Have line voltage checked
Power supplyʼs breakers tripped Reset breakers on rear panel
Defective power supply cables Have cables tested
Defective power supply or preamp Return to dealer for service
Amber power indication, but sound not
heard from one channel
No signal from one channel of source Check source controls, cables, and
connections
One Channel is muted by balance control Recenter balance on preamp
No signal out to power amplifier Check connections to power amp