Specifications

OPERATION
POWERING UP
With all your connections made, you are ready to listen to your
Boulder 1008 Phono Preamplifier.
Push on the “I” of the rocker switch on the rear panel of the 1008.
No indication on the front panel will be shown.
Press the STANDBY pushbutton on the front of the 1008. The
STANDBY indicator will be amber. The MUTE indicator will be red
and the output will be muted for the first 35 seconds to allow for cir-
cuit warm up.
The front panel STANDBY pushbutton can be used for everyday
turn on and off. This pushbutton mutes the outputs, turns off the
audio electronics, and puts the 1008 in standby mode.
If you are going to turn off the 1008 rear main power, it is highly
recommended to turn off the 1008 by first pressing the front panel
STANDBY pushbutton.
OPERATION
3-1