Instructions / Assembly

SC2187401-BO-00(Eng) 19 of 23 20150120 ver.1
4. Remove M5 bolts and nuts at heating element and take the element out from the unit.
5. Replace a new heating element back to the unit. Reinstall it by using M5 bolts and nuts from
step 4.
6. Connect two wire connectors (red and white) to the terminals of the new heating element
and then install the ground wire (yellow and green) by using M4 bolt and nut from step 3 as
shown below.
7. Install the protective cover to the back panel by using 6 pcs M4 screws from step 2.
Yellow and green