Instructions / Assembly

SC2187401-BO-00(Eng) 16 of 23 20150120 ver.1
3. Install 2pcs new “AAA” Alkaline batteries. Make sure the positive (+) and negative (-) polarities
of the batteries matching with the symbols engraved on the battery apartment.
4. Install the battery cover back to the remote.
Note: i, Batteries do not include. ii, Remove batteries before storing remote control.
How to test frequency range:
 Switch the unit on.
 Use the remote control to switch the light on and off when you move away from the unit.
 When the light cannot be switched on and off by remote control, it is out of frequency range.
IMPORTANT INFORMATION
 Do NOT expose the remote control under sunlight for prolonged period of time.
 Remote control has frequency range up to 100ft (30m).
 Test frequency range before and during use.
TROUBLESHOOTING
If the remote cannot work properly or interface correctly with control panel, the cause may be
weak batteries, batteries installed incorrectly or remote is not linked correctly with control panel.
Possible solutions
Replace batteries and install with right polarities referring to the diagram engraved in the battery
apartment.
Link remote and control panel by:
1. Switch on both of control panel & remote.
2. Press and hold TEMP button on control panel for 3 seconds.
3. For remote, press the button in the sequence: MEAT PROBE, LIGHT, MEAT PROBE, LIGHT
(pressing interval between each button must be within 5 seconds). You can hear a short beep
sound after you press the button.