Instructions / Assembly

SC2187401-BO-00(Eng) 15 of 23 20150120 ver.1
How to use meat probe:
 Insert the meat probe into center of meat to get more accurate temperature reading.
 Press and hold MEAT PROBE button until LED display show the temperature of meat inside.
 When MEAT PROBE button is released, LED display will resume to smoking temperature or
counting time.
How to use light:
 Press LIGHT button to switch the light on.
 Press LIGHT button to switch the light off.
How to RESET control panel:
If LED display shows an error message, follow below steps to reset the control panel:
1. Switch the unit off,
2. Unplug the unit from outlet,
3. Wait for ten seconds,
4. Plug the unit back into outlet,
5. Switch the unit on.
How to replace batteries for remote control:
1. Turn the remote control to back side. Remove the belt clip by sliding it to leftwards.
2. Press the tab of battery cover down then pull the cover out.