Full Product Manual

7 Error Code Problems and Troubleshooting

Issues

Refrigerator does not

work

Refrigerator compart-

ments are too warm

Food is frozen

A "water flow" noise

from inside the fridge

There are waterdrops

around the refrigerator

casing or door gap.

The compressor is

slightly noisy when

starting

Code F1 displayed

Code F2 displayed

Code F3 displayed

Code F4 displayed

Code F5 displayed

Code F6 displayed

Code F7 or F8 displayed

Suggestions

Check if the switch is on.

Check if the plug and socket are connected well.

Check if the fuse has been burnt.

Check if the power supply has malfunctioned.

Switching on/off the fridge frequently may cause a start

delay of the compressor.

The door is opened frequently.

A large amount of warm or hot food was stored recently.

Wait for the refrigerator to reach its selected temperature.

The refrigerator has been disconnected for a while.

The temperature was set too low, please increase the

temperature.

It's a normal phenomenon, caused by the flow of refriger-

ant.

It's a normal phenomenon, the moisture will condense to

water when it touches the cold surface of the refrigerator.

It s a normal phenomenon, the noise will be reduced after

the compressor works stably.

Possible cause low voltage to the fridge. Adjust the battery

protection from H to M or from M to L.

Possible cause: condenser fan is overloaded.