User Manual

The definition of the error code on the display

E2 Fan problem

Compressor

turbine speed

too low

Er1

Controller chip

overheating

NTC opening or

short circuit

Input voltage

too low

① Situation: Insert the power cord into the car cigar lighter

before the car start.

Solution: Connect the refrigerator later after the car starts.

② Situation: Power the refrigerator from an outlet.

Solution: Adjust the battery protection level to the low level.

If the refrigerator still no start properly, please contact the

service for a new adapter.

Please contact the service for a new fan and the

replacing video and replace it.

The input voltage needs to be adjusted and reconnect the

power.

The refrigerator should be turn off and keep for 5

minutes. Then, check whether the area around the

compressor vent is blocked. If not, restart it again.

① Situation: E3 appears when use the refrigerator in a car.

Solution: Turn off the refrigerator, stay 5 minutes and turn it

on, it can work normally. If it still can not works after

restart, it is classified under E1 fault, please reference to E1

Fault troubleshooting and solution.

② Situation: E3 appears when use the refrigerator at home

Solution: Adjust battery protection level to middle or low

level. If it still can not works, please contact the service for

a new adapter.

Compressor start

up frequently

Input voltage fault

Error Code Error Type Solutions