User Manual

7
5.8 Memory Function
The car refrigerator has a power-off memory function. The working state (power on/off
state and working mode) before disconnecting the power supply will be automatically
restored. You don't need to set the temperature and mode when your refrigerator is
connected to the power supply again.
Recommended temperature for common food:
6 Car Battery Protection(H/M/L) Voltage Reference
The refrigerator is equipped with a battery preservation monitor. There are three levels
(H/M/L) to monitor your battery to prevent a full discharge. The higher the level the
higher the cut-off voltage will be.
When set to "High", the battery monitor will provide maximum protection for the battery
running the refrigerator against excessive/full discharge.
When set to "Low", the battery monitor will allow the refrigerator to use more of the
battery energy.
The battery monitor will power off the refrigerator as soon as the supply voltage falls
below the setting level. The refrigerator will restart after 2 minutes once the cut-in
voltage is reached.
Voltage
NOTE:
Factory default voltage protection level sets to H Mode
Cut out means the input voltage in which the refrigerator will turn off.
Cut in means the input voltage in which the refrigerator will turn on.
High Mode
12V DC
Cut out 11.3V 10.1V 9.6V
12.5V 11.4V 10.9V
24.6V 22.3V 21.3V
26.0V 23.7V 22.7V
Cut in
Cut out
Cut in
24V DC
Medium Mode Low Mode