Product Specs

© 2022 BouffaloLab Inc.
The final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID:
2A9HW-BL602”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this
RF module in the user's manual of the end product which integrates this module. The end user manual shall include all
required regulatory information/warning as show in this manual.
Integration instructions for host product manufactures according to KDB 996369 D03 OEM Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247
2.3 Specific operational use conditions
The module is a Bluetooth module with WiFi & BLE 2.4G function.
WiFi Specification：
Operation Frequency: 2412~2462MHz
Number of Channel: 11
Modulation: DSSS, OFDM
Type: PCB Antenna
Gain: 2.36 dBi
BLE Specification：
Operation Frequency: 2402~2480MHz
Number of Channel: 40
Modulation: GFSK
Type: PCB Antenna
Gain: 2.36 dBi
The module can be used for mobile or applications with a maximum 2.36dBi antenna. The host manufacturer installing
this module into their product must ensure that the final composit product complies with the FCC requirements by a
technical assessment or evaluation to the FCC rules, including the transmitter operaition. The host manufacturer has to be
aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual
of the end product which integrates this module. The end user manual shall include all required regulatory
information/warning as show in this manual.
2.4 Limited module procedures
Not applicable.
2.5 Trace antenna designs
Not applicable. The module has its own antenna, and doesn’t need a host’s printed board microstrip trace antenna etc.
2.6 RF exposure considerations
The module must be installed in the host equipment such that at least 20cm is maintained between the antenna and users’
body; and if RF exposure statement or module layout is changed, then the host product manufacturer required to take