User Manual

Charging Dock
Installation Instructions
1. Connect the power adaptor with the charging dock.
Note:
• Put the extra cable into the slot on the back of the charging dock to prevent the cables from being stretched by the robot while cleaning.
• The charging dock indicator is solid when it has power and is off when the robot is being charged.
2. Place the charging dock on the horizontal hard floor and connect the power supply.
Note:
• Leave 1 meter (3.3 feet) on both sides and 1.5 meters (4.9 feet) in the front of the charging dock, and make sure there is no objects or
strong light within this area.
• Ensure the charging dock is placed at least 1.5 meters (4.9 feet) away from stairs, other open areas, and heat sources (such as
heaters).
3. To ensure the Robot can clean and recharge, do not put the charging dock on carpets or move it frequently. If the charging
dock is moved, the Robot may fail to locate itself or remove the current map. It will create and save a new map during the next
cleaning.
Note:
• The map information (no-go zones, room names, etc.) may loss after rebuilding.