User Manual

specialized water tank test employed in the factory before delivery and is a normal occurrence. This will not affect product usage.
If you need to transport this product, please ensure that the Robot is turned off. It is recommended to use the original packaging for
transportation.
If you will not use this product for a long period of time, turn off the robot after it is fully charged and putthe product in a cool and dry
place. Charge the Robot at least once every three months to avoid over-discharge from the battery.
If you live in an area prone to electrical storms, it is recommended that you use additional surge protection. Your charging station may
be protected with a surge protector in the event of severe electrical storms.
Please use this product in accordance with the manual. Liabilities for any loss or injury caused by improper use shall be solely borne by
the user.
RECYCLING AND DISPOSAL
Disconnect the product from the charging dock, turn it off, and remove the battery before recycling or disposal.
Place the battery in a sealed plastic bag and recycle or dispose of it safely according to local environmental regulations.
It is strictly prohibited to burn the product even if the product is severely damaged.
Laser safety information
All laser sensors meet the class 1 laser product standard of IEC60825 and does not produce dangerous laser radiation.
Execution standard: IEC60335
California residents
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Due to California’s Proposition 65 Law, a warning must be posted on all products that may be sold into California. The warning does not
mean
that our products actually will cause any harm.
Product Overview
Robot
Note:
After the Robot is turned on, press buttons and hold for 3 seconds to reset Wi-Fi