Safety Information

Page 3 of 43
Report Ref. No.: 68.210.18.0104.01
TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch
TRF No. IEC60950_1F
Test item particulars...................................................:
Equipment mobility.................................................:
[X] movable [] hand-held [] transportable
[] stationary [] for building-in [] direct plug-in
Connection to the mains........................................:
[X] pluggable equipment [X] type A [] type B
[] permanent connection
[X] detachable power supply cord
[] non-detachable power supply cord
[] not directly connected to the mains
Operating condition................................................:
[X] continuous
[] rated operating / resting time:
Access location ......................................................:
[X] operator accessible
[] restricted access location
Over voltage category (OVC) ................................:
[] OVC I [X] OVC II [] OVC III [] OVC IV
[] other:
Mains supply tolerance (%) or absolute mains
supply values .........................................................:
±10% (requested by applicant)
Tested for IT power systems .................................:
[] Yes [X] No
IT testing, phase-phase voltage (V) ......................:
N/A
Class of equipment ................................................:
[] Class I [X] Class II [] Class III
[] Not classified
Considered current rating of protective device as
part of the building installation (A) .......................:
16A
Pollution degree (PD) .............................................:
[] PD 1 [X] PD 2 [] PD 3
IP protection class ..................................................:
IP20
Altitude during operation (m) ................................:
≤2000
Altitude of test laboratory (m) ...............................:
<500
Mass of equipment (kg) .........................................:
Approx. 0.301kg
Possible test case verdicts:
- test case does not apply to the test object ........... :
N/A
- test object does meet the requirement .................. :
P (Pass)
- test object does not meet the requirement ........... :
F (Fail)
Testing .......................................................................... :
Date of receipt of test item ........................................ :
2018-03-19
Date (s) of performance of tests ............................... :
From 2018-03-19 to 2018-05-08