User manual

7 Operating
Press [TX]/[RX] to toggle the operating mode of the device between transmitter and
receiver.
ð
The [TX] LED lights up: The device is congured as a transmitter.
The [RX] LED lights up: The device is congured as a receiver.
1. Make sure that the receivers to be connected to do not have an active connection to
another transmitter.
2. Briey press the [Search] button on the transmitter. The [Link] LEDs on transmitter and
receiver ash fast, the connection is being established.
3. If the [Data] LED lights up, a DMX signal is present at the transmitter.
Switching operating mode of
transmitter / receiver
Establishing connection if the
device operates as a transmitter
Operating
24
W-DMX Box G5
transceiver