User manual
Table Of Contents
First set the desired DMX address. Press [MENU] to change to the next menu. Press one of the
arrow buttons repeatedly until the display shows ‘d---’ .
Press [MENU] to switch to Dimmer-Limit mode. Use the arrow buttons to set a value between
10 and 100 (display shows ‘L010’ … ‘L100’ ). The value is applied automatically.
Press [MENU] to switch to Dimmer-Preset mode. Use the arrow buttons to set a value between
0 and 100 (display shows ‘L010’ … ‘L100’ ). The value is applied automatically.
Press [MENU] to apply the settings and return to adjusting the DMX address.
Dimmer-Pack mode
Operating
20
UP-2 - 1 Channel Dimmer 10 A
dimmer pack