User manual

6 Operating
Connect the device to the power grid. The unit starts with the last settings. The display shows
the last set DMX address.
If the power supply is unstable, the display shows ‘AC-0’ . In this case, wait until the display
turns o.
The display shows the last set DMX address, e.g. ‘A123’ . Use the arrow buttons to select a value
between 1 and 512 (display shows ‘A001’ ‘A512’ ). The setting is instantly applied.
While setting the DMX address the output is switched o.
Starting the device
DMX address
Operating
18
UP-2 - 1 Channel Dimmer 10 A
dimmer pack