User manual

First set the desired DMX address. Press [MENU] to change to the next menu. Press one of the
arrow buttons repeatedly until the display shows ‘S---’ .
Press [MENU] to switch to Switch-Pack mode. There are two statuses.
n Switch On:
The output is switched on, a connected spotlight lights regardless of the DMX signal.
n Switch O:
A connected spotlight is operated depending on the DMX signal. If the DMX signal speci‐
es a brightness of less than 40 % (corresponds to the value range 0 … 101) the spotlight
is turned o; if the DMX signal species a brightness of 40 % or more (corresponds to the
value range 102 … 255) the spotlight is turned on.
Use the arrow buttons to choose between Switch On (display shows ‘S-on’ ) and Switch O
(display shows ‘S-oF’ ). Press [MENU] to apply the settings and return to adjusting the DMX
address.
Switch-Pack mode
Operating
18
UP-1 - 1 Channel Dimmer
dimmer pack