User manual

First set the desired DMX address. Press [MENU] to change to the next menu. Press one of the
arrow buttons repeatedly until the display shows ‘S---’ .
Press [MENU] to switch to Switch-Pack mode. There are two statuses.
n Switch On:
The output is switched on, a connected spotlight lights regardless of the DMX signal in full
brightness.
n Switch O:
A connected spotlight is operated depending on the DMX signal. If the DMX signal speci‐
es a brightness of less than 40 % (DMX value below 102) the headlight is turned o; if the
DMX signal species a brightness of 40 % (DMX value 102) or more the spotlight is turned
on.
Use the arrow buttons to choose between Switch On (display shows ‘S-on’ ) and Switch O
(display shows ‘S-oF’ ). Press [MENU] to apply the settings and return to adjusting the DMX
address.
Switch-Pack mode
Operating
Uni-Dim 1 Professional Dimmer
19
digital dimmer and switcher