User manual

Set DIP switches 9 and 10 to ‘OFF’ .
ð
The self-test starts.
1. Set DIP switches 9 to ‘ON’ and 10 to ‘OFF’ .
2. Use the DIP switches 1 to 4 to set the programme speed, and the DIP switches 5 to 8 to
adjust the brightness of the self-test. The lowest programme speed or brightness is set
when all four DIP switches are set to ‘OFF’ . The highest programme speed or brightness
is set, when all four DIP switches are set to ‘ON’ .
ð
The self-test starts with the selected settings.
Selecting operating mode
‘Automatic self-test’
Selecting operating mode
‘Manual self-test’
Operating
SP-1500 DMX Strobe
31
stroboscope