User manual

The value of the DIP switches 1-9 is binary coded. To set the desired DMX address, set the DIP
switches so that the sum of the resulting numbers yields the desired DMX address. Please
orient yourself by the following table:
9 8 7 6 5 4 3 2 1 DMX address
0 0 0 0 0 0 0 0 1 1
0 0 0 0 0 0 0 1 0 2
0 0 0 0 0 0 1 0 0 4
0 0 0 0 0 1 0 0 0 8
0 0 0 0 1 0 0 0 0 16
0 0 0 1 0 0 0 0 0 32
0 0 1 0 0 0 0 0 0 64
0 1 0 0 0 0 0 0 0 128
1 0 0 0 0 0 0 0 0 256
0: DIP switch is in ‘OFF’ position. 1: DIP switch is in ‘ON’ position.
Setting up the DMX address
Operating
SP-1500 DMX Strobe
29
stroboscope