User manual

6 DMX input [DMX IN]
An additional DMX controller can be connected via [DMX IN] to control more than 24 channels. Up to four controllers can
be linked to control up to 96 channels. When the rst device outputs the addresses [1] … [24] and a second device out‐
puts the addresses [25] … [48], for example, the signal is executed without change. If the DMX ranges of both controllers
overlap, e.g. both controllers are set to channels [1] … [24], the last changed setting of the controller is output.
7 [ON | OFF]
Main switch. Turns the device on and o.
8 IEC chassis plug for mains connection, with fuse holder
Connections and controls
SDC-24 DMX Desk
17
DMX controller