User manual

ManualsBrandsBotex ManualsDMX RecordersDMX RecorderAllows you to download scenes from another DMX controller. All data can be sent or received (between 2 or more devices). The running programs can be changed in speed and brightness

Table Of Contents

6.3 Data exchange

1. Press and hold [BLACK-OUT] for three seconds.

2. Press [PROGRAM] and [BLACK-OUT] simultaneously. If the device has stored scenes, the

display shows ‘OUT’ , indicating that data can be sent. Otherwise the display shows

‘EPTY’ – all programs are empty.

3. Make sure that the receiving device is in Receive mode to fully receive the le.

4. Press [FADE+SPEED/DEL] to send the data set. During sending, no other functions are

accessible.

5. When sending is complete, the display shows ‘END’ . Press any button to exit this mode.

Sending data

Operating

30

SD-10

DMX recorder