User manual

From a cable length of more than 300 m or after 32 connected DMX devices, the
signal must be strengthened by a DMX booster.
Every DMX device operates with a certain vendor specic number of channels through which
the incoming control signals are converted into movements, brightness or colour changes,
etc.. Since all receivers in a DMX chain always receive all signals, a starting address must be
assigned to each DMX device. Starting from this address (a value between 1 and 512), the
incoming signals are then interpreted by the receiver and implemented in accordance with
the function mode set on the receiver (device-internal channel assignment).
Signal conversion
DMX basics and addressing
18
Rainbow Rider DMX
DMX controller