Data Sheet

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 420602_16.05.2022
PTS-4 Power Twist Splitter
EN
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source.
Keep the device away from naked ames.
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual current
circuit breaker. Failure to do so could result in damage to the device and possibly injure
the user. Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags,
packaging, etc. are properly disposed of. Do not just dispose of these materials with your
normal household waste, but make sure that they are collected for recycling. Please
follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment
Directive (WEEE) in its currently valid version. Do not dispose with your normal
household waste. Dispose of this device through an approved waste disposal rm or
through your local waste facility. When discarding the device, comply with the rules and
regulations that apply in your country. If in doubt, consult your local waste disposal
facility.
Features
 Fourfold Power Twist Splitter
 20 A resettable fuse
 1 × Power Twist input
 1 × Power Twist through-connection
 4 × Power Twist outputs
 2 × M10 mounting thread
 1 × M10 eye bolt, supplied
Technical specifications
 Input connections Power In 1 × lockable input socket(Power Twist)
 Output connections Power Thru 1 × lockable output socket (Power Twist)
Power Out 4 × lockable output socket (Power Twist)
 Degree of protection IP20
 Diameter inner wiring 2.5 mm
2
 Supply voltage 230 V ~ 50 Hz
 Load capacity 20 A
 Dimensions (W × H × T) 270 mm × 60 mm × 60 mm
 Weight 1.0 kg
 Colour black
 Material metal
 Ambient conditions Temperature range 0 °C…40 °C
Relative humidity 20 %…80 % (non-condensing)
Intended use
This device is used to distribute electrical power to several connected consumers. Any
other use or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard! Ensure that children do not detach
any small parts from the unit. They could swallow the pieces and choke! Never let
children unattended use electrical devices.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any
covers. There are no user-serviceable parts inside. Do not use the device if covers,
protectors or optical components are missing or damaged..
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or re. If in doubt, seek advice from a registered electrician.