Manual Firmware V1.3.7

6 Operating
1.
Press to show the main menu. Use [Up] | [Down] to select the menu item ‘Port-
Cong’ and conrm with [Setup]. The display shows the mode of the 8 interfaces. The
displayed values have the following meaning:
Display Name Function
‘O’ DMX output When an interface is set to output mode, DMX data packets
are sent at the set intervals. Immediately after switching on,
all channel values are sent with 0. After receiving an ArtDMX
packet, the channel values of the corresponding interfaces
are updated.
‘Hold’ Select ‘Hold’ to maintain the DMX output function,
that is, the device does not receive ArtNet/sACN
data, but still outputs DMX signals (default setting).
‘O’ Select ‘O’ to not maintain the DMX output, that is,
the device does not receive ArtNet/sACN data and
does not output DMX signals.
Conguring DMX interfaces
Operating
NETcon 8-3 / 8-5
19
ArtNet DMX converter