Manual Firmware V1.3.6

Dis‐
play
Name Function
‘I’ DMX input When an interface is set to input mode and DMX data is
received at the interface, the data is sent immediately to the
congured IP address or via the broadcast device via ArtDMX. If
the 15-bit interface address matches, the other device will
accept the DMX data.
‘R’ RDM In RDM mode, the interface initiates a test of the device after
power up or after changing the interface mode, and incremen‐
tally checks the device every 3 seconds. When the ArtNet con‐
troller issues an ArtTodRequest instruction, the converter imme‐
diately creates a list of the UIDs of the connected devices. It
supports ArtRdm when sending other RDM instructions.
‘U’ Online
upgrade
This is the support function of the device. Here you can update
the converter yourself or the device that is in connection mode
through the interface through an encrypted upgrade le pro‐
vided by the ArtFirmwareMaster instruction.
Operating
22
NETcon 8-3 / 8-5
ArtNet DMX converter