Manual Firmware V1.3.6

Table Of Contents

6 Operating

Press to show the main menu. Use [Up] | [Down] to select the menu item ‘Port-

Cong’ and conrm with [Setup]. The display shows the mode of the 8 interfaces. The

displayed values have the following meaning:

Dis‐

play

Name Function

‘O’ DMX

output

When an interface is set to output mode, DMX data packets are

sent at the set intervals. Immediately after switching on, all

channel values are sent with 0. After receiving an ArtDMX

packet, the channel values of the corresponding interfaces are

updated.

‘Hold’ Select ‘Hold’ to maintain the DMX output function,

that is, the device does not receive ArtNet/sACN

data, but still outputs DMX signals (default setting).

‘O’ Select ‘O’ to not maintain the DMX output, that

is, the device does not receive ArtNet/sACN data

and does not output DMX signals.

Conguring DMX interfaces

Operating

NETcon 8-3 / 8-5

ArtNet DMX converter