Manual Firmware V1.3.6

The unit has been designed for rack mounting in a standard 19-inch rack; it occupies one rack
unit.
The converter is connected to a computer network via one of the Ethernet interfaces or via an
Ethernet switch or directly to a PC or notebook. The data is transferred to the converter and
then sent internally to the XLR connectors for the DMX output. If more than eight universes are
needed, the other Ethernet interface can be used to daisy chain multiple converters.
The data can also be received via the correspondingly congured DMX connections and trans‐
mitted via the Ethernet interfaces to a set IP address or via a broadcast device via ArtDMX.
Rack mounting
Data connections
Installation and starting up
NETcon 8-3 / 8-5
17
ArtNet DMX converter