Manual Firmware V1.3.3

6 Operating
1.
Press to show the main menu. Use [Up] | [Down] to select the submenu ‘Port-Cong’
and conrm with [Setup]. The display shows the mode of the 8 interfaces. The displayed
values have the following meaning:
Display Name Function
‘O’ DMX output When an interface is set to output mode, DMX data
packets are sent at the set intervals. Immediately after
switching on, all channel values are sent with 0. After
receiving an ArtDMX packet, the channel values of the
corresponding interfaces are updated.
‘I’ DMX input When an interface is set to input mode and DMX data is
received at the interface, the data is sent immediately
to the congured IP address or via the broadcast device
via ArtDMX. If the 15-bit interface address matches, the
other device will accept the DMX data.
Conguring DMX interfaces
Operating
NETcon 8-3 / 8-5
21
ArtNet DMX converter