User manual

1. Press [MODE] to activate ‘Chase’ mode or ‘Receive’ mode.
ð
The [Chase] indicator lights up, when the ‘Chase’ mode is active. The [Receive] indi‐
cator lights up, when the ‘Receive’ mode is active.
2. Press [MENU] to select the output channel of the device (display shows ‘C1-d’ … ‘C4-d’ ).
3.
Use or to select ‘-S’ for enabling Switch mode. The setting is instantly applied.
ð
Switch mode is activated. A spotlight connected to this output channel lights up in
full brightness regardless of the DMX signal.
4.
Use or to select ‘-d’ for disabling Switch mode. The setting is instantly applied.
ð
Switch mode is deactivated. A spotlight connected to this output channel is oper‐
ated depending on the DMX signal.
Operating
MPX-4LED Multipack
25
digital dimmer and switcher