User manual

3.
Use or to select a value between 0 and 100 (display shows ‘d:000’ … ‘d:100’ ) to set
the dimmer intensity. The setting is instantly applied.
1. Press [MODE] to enable ‘Receive’ mode.
ð
The [Receive] indicator lights up.
2. Press [MENU] repeatedly until the display shows ‘A:XXX’ .
3.
Use or to select a value between 1 and 512 (display shows ‘A:001’ … ‘A:512’ ) as start
address for channel 1. The setting is instantly applied. Channels 2, 3 and 4 are automati‐
cally given addresses that follow the address selected for channel 1.
The unit can be controlled via 1, 2 or 4 DMX channels.
1. Press [MODE] to enable ‘Receive’ mode.
ð
The [Receive] indicator lights up.
2. Press [MENU] repeatedly until the display shows ‘CH:01’ , ‘CH:02’ or ‘CH:04’ .
Setting the DMX address
Selecting the number of DMX
channels
Operating
MPX-4LED Multipack
23
digital dimmer and switcher