User manual

3.
Use or to select a value between 1 and 16 (display shows ‘P:01’ … ‘P:16’ ), to select
the chase programme you want to activate. 16 programmes and the sequential run of
the 16 programmes are available. The setting is instantly applied.
1. Press [MODE] to enable ‘Chase’ mode.
ð
The [Chase] indicator lights up.
2. Press [MENU] repeatedly until the display shows ‘SP:XX’ .
3.
Use or to select a value between 1 and 99 (display shows ‘SP:01’ … ‘SP:99’ ) to set the
desired programme speed. The setting is instantly applied.
1. Press [MODE] to enable ‘Chase’ mode.
ð
The [Chase] indicator lights up.
2. Press [MENU] repeatedly until the display shows ‘d:XXX’ .
Setting programme speed
Setting the dimmer intensity
Operating
22
MPX-4LED Multipack
digital dimmer and switcher