User manual

6 Operating
Connect the device to the power grid.
ð
The unit starts with the last settings. The display shows the last set DMX address.
With [MODE] to select the desired operating mode. Here you have the choice between the
modes:
n Chase: Chase mode is used when the device is used without a DMX controller.
n Receive: Receive mode is used when the device is used without a DMX controller.
1. Press [MODE] to enable ‘Chase’ mode.
ð
The [Chase] indicator lights up.
2. Press [MENU] repeatedly until the display shows ‘P:XX’ .
Starting the device
Selecting the operating mode
Selecting chase programme
Operating
MPX-4LED Multipack
21
digital dimmer and switcher