User manual

8. Use the jog wheel to select ‘Channel:’ and press the jog wheel.
Set the desired value with the jog wheel. Press the jog wheel to conrm.
9. To select which devices should be aected by the change, use the Jog Wheel to select
‘Only self’ and press the jog wheel. Turn the jog wheel to select one of the following for‐
mats.
n ‘Only Self’ : Change only aects the selected device
n ‘Same mfrs’ : Change aects all devices from the same manufacturer as the selected
device
n ‘All Device’ : Change aects all connected devices
Operating
58
Dr. RDM I DMX RDM Tester
controller