User manual

6. Use the jog wheel to select ‘Start Identify’ to start or ‘Stop Identify’ to stop the identica‐
tion. Press the jog wheel.
7. To select which devices should be aected by the change, use the Jog Wheel to select
‘Only self’ and press the jog wheel. Turn the jog wheel to select one of the following for‐
mats.
n ‘Only Self’ : Change only aects the selected device
n ‘Same mfrs’ : Change aects all devices from the same manufacturer as the selected
device
n ‘All Device’ : Change aects all connected devices
Operating
Dr. RDM I DMX RDM Tester
51
controller