User manual

12. To change the rst channel for which DMX values are to be sent, use the jog wheel to
select ‘Start/Channel’ and press the jog wheel. Turn the jog wheel until the number of
the desired channel appears at ‘Start’ . Press the jog wheel to conrm.
13. To set the transmitted DMX value in the range 0 to 255, rst select the value with the jog
wheel. Press the jog wheel. Set the desired value with the jog wheel. Press the jog wheel.
14. To change the display format, use the jog wheel to select ‘Format’ and press the jog
wheel. Turn the jog wheel to select one of the following formats.
n ‘DEC’ : Decimal values
n ‘PER’ : Percentage values
Operating
30
Dr. RDM I DMX RDM Tester
controller