User manual

n ‘Stop’ : The transmitted DMX value can not be changed
7. To select the value range of the data transmitted, select the item ‘Channel Level’ . Press
the jog wheel. Use the jog wheel to set a value between 0 and 255.
8. To set the rate of change, select ‘Speed’ . Press the jog wheel. Use the jog wheel to set a
value between ‘level 0’ and ‘level 10’ .
9. To return to the parent menu, select ‘EXIT’ and press the jog wheel to conrm.
10. Select the item ‘Multiple Channel Mode’ from the submenu ‘DMX-512 SEND’ .
11. Press the jog wheel to open the respective submenu.
ð
The display shows:
Operating
Dr. RDM I DMX RDM Tester
29
controller