User manual

5. To select the channel on which the data should be sent, select the item ‘Channel’ . Press
the jog wheel. Use the jog wheel to set a value between 1 and 512 – or ‘All’ for transmis‐
sion on all channels.
6. To select an operating mode, select ‘Mode’ . Press the jog wheel. Use the jog wheel to
select one of the following options:
n ‘Fader Only’ : The transmitted DMX value can be adjusted between 0 and 255 with
the jog wheel.
n ‘Auto ON/OFF’ : The transmitted DMX value automatically changes at the set speed
n ‘Ramping’ : The transmitted DMX value rises evenly with the set speed, then the
process repeats itself
Operating
28
Dr. RDM I DMX RDM Tester
controller