User manual

1. Select the item ‘DMX Data Receive’ from the submenu ‘DMX-512 Test’ .
2. Press the jog wheel to open the respective submenu.
ð
The display shows:
It will display the received DMX value ( ‘000’ … ‘255’ ) for every 25 channels.
3. To change the rst displayed channel, use the jog wheel to select ‘Start’ and press the
jog wheel. Turn the jog wheel until the number of the desired channel appears at ‘Start’ .
Press the jog wheel to conrm.
Analysis of received DMX data
Operating
Dr. RDM I DMX RDM Tester
25
controller